Microcomputer Controlled Electro-Hydraulic Servo Control Dynamic and Static Universal Fatigue Testing Machine
Fatigue Testing Machines

Overview
The CHENJI microcomputer controlled electro-hydraulic servo dynamic and static universal fatigue testing machine is designed to determine the fatigue properties, fatigue life and prefabricated cracks of metals, alloy materials and their components, and to apply tensile, compression or tension-compression alternating dynamic loads, as well as to measure their static load capacity, at room and elevated temperature. It is a highly versatile servo-hydraulic test system that combines static and dynamic testing in one frame.
The machine is driven by a closed-loop electro-hydraulic servo actuator and a microcomputer control system, so it can perform low-, intermediate- and high-cycle fatigue tests, fracture-toughness tests, crack-growth tests and static tensile or compression tests with accurate load, displacement and deformation control. Because the loop is closed, the controller continuously compares the measured value with the commanded value and corrects the servo valve, which is what gives the machine its control stability and repeatability over long-duration tests.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | HST-HFT50B / 100B / 200B / 250B |
| Static load | 50 / 100 / 200 / 250 kN |
| Dynamic load | ± 40 / ± 80 / ± 160 / ± 160 kN |
| Load accuracy | ± 1.0% FS (dynamic) |
| Displacement accuracy | ± 1.0% FS |
| Deformation accuracy | ± 1.0% FS |
| Frequency | 0.1 – 15 Hz (optional 20 / 50 Hz) |
| Piston stroke | ± 50 / ± 75 mm |
| Column distance | 500 / 700 mm |
| Gripping distance | 50 – 600 mm |
| Hydraulic power unit | Flow ≥ 45 L/min, 21 MPa, 380 V 3-phase |
| Frame | Rigid four-column frame with precision servo valve and hydraulic power unit |
| Standard | GB/T 3075, ISO 1099, ASTM E466 |
| Applications | Aerospace, automotive, machinery, railway, construction, materials research, quality-control laboratories |
Closed-loop servo control and the four-column frame
The machine is built on a rigid four-column frame with a precision servo valve, a hydraulic power unit and digital control software. The closed-loop control means the actuator is commanded to follow a load, displacement or deformation target and the controller corrects the servo valve continuously, so the commanded value is held accurately even as the specimen softens or cracks. This control stability and repeatability is what allows long-duration fatigue tests to be run without the amplitude drifting, and the frame is stiff enough that frame deflection does not distort the specimen measurement.
Fatigue tests and static tests in one machine
The machine performs low-cycle, intermediate-cycle and high-cycle fatigue tests, fracture-toughness tests and crack-growth tests, and it also applies static tensile and compression loads, all in one frame. Tests can be run at room and elevated temperature. The static load range is 50 to 250 kN with a dynamic load of ± 40 to ± 160 kN depending on the model, the frequency range is 0.1 to 15 Hz (20 or 50 Hz optional), and the piston stroke is ± 50 or ± 75 mm. Load, displacement and deformation are each accurate to ± 1.0% FS.
Applications and standards
Because one frame covers fatigue, fracture and static testing, the machine is used in the aerospace, automotive, machinery, railway and construction industries, in materials research and in quality-control laboratories. Gripping distance is 50 to 600 mm and the column distance is 500 or 700 mm, and the hydraulic power unit is specified at a flow of at least 45 L/min and 21 MPa from a 380 V three-phase supply. The machine complies with GB/T 3075, ISO 1099 and ASTM E466 for the fatigue testing of metallic materials.
Frequently Asked Questions
What is this fatigue testing machine used for?
It determines the fatigue properties, fatigue life and prefabricated cracks of metals, alloys and their components, and applies tensile, compression or tension-compression alternating dynamic loads, as well as measuring static load capacity, at room and elevated temperature.
What capacity and dynamic load are available?
The HST-HFT series is offered with static loads of 50, 100, 200 and 250 kN and dynamic loads of ± 40, ± 80, ± 160 and ± 160 kN for the HFT50B, 100B, 200B and 250B models respectively.
What frequency range does the machine cover?
0.1 to 15 Hz as standard, with 20 Hz or 50 Hz available as an option.
What is the accuracy of the machine?
Load accuracy is ± 1.0% FS (dynamic), and displacement and deformation accuracy are each ± 1.0% FS.
Which standards does it comply with?
It complies with GB/T 3075, ISO 1099 and ASTM E466 for the fatigue testing of metallic materials.
Related Products & Pages
- Fatigue Testing Machines
- Metal Testing Machines
- DST2000 Electro-Hydraulic Servo Dynamic and Static Universal Test Machine
- High Temperature Fatigue Testing Machine
About CHENJI & Support
CHENJI is the brand of Jinan Chenji International Trade Co., Ltd. (Shandong, China), a manufacturer and exporter of material testing machines since 2014, with in-house quality control plus third-party inspection by SGS or Bureau Veritas. The company holds ISO 9001 certification (626024QH073R1) and is a Bureau Veritas audited supplier (MIC-ASR2451820). Testing machines are normally supplied with a calibration certificate valid for 12 months and traceable to national force standards, and our engineers help you select the machine, fixtures and accessories for your specimen and method.
Every quotation is prepared against the standard you test to, so the delivered machine matches the test method rather than only the headline capacity. Spare parts, consumables and calibration support are available after delivery, and machines can be produced to OEM or ODM requirements when a customer drawing or specification is provided.
Selecting and Verifying a Testing Machine
Choosing a machine is a matter of matching capacity to the specimen and the method, not of buying the largest frame. A 1000 kN machine is not suitable for a sample that needs 1 N of force; capacity selection follows the specimen and the standard, and the force measuring system should be verified per ISO 7500-1 or ASTM E4 on a regular schedule. Load cells are commonly supplied as class 0.5 or class 1, which means the indicated force stays within ±0.5% or ±1% of the true force.
Test results are only comparable when they are quoted together with the standard, the specimen geometry, the test speed and the force measurement class. We are glad to review your test method and specimen so that the machine, fixtures and accessories are correctly specified before you order.
Request a Quotation
Tell CHENJI the component, the load and the fatigue life you need to demonstrate, and we will confirm the HST-HFT electro-hydraulic servo fatigue testing machine, grips and extensometer for a quotation.
Email annie@chenjitester.com or call / WhatsApp +86 158 5311 1612.
More Photos




